Z*Net: 5-Dec-92 #9221
From: Bruce D. Nelson (aa789@cleveland.Freenet.Edu)
Date: 12/12/92-08:25:49 AM Z
From: aa789@cleveland.Freenet.Edu (Bruce D. Nelson)
Subject: Z*Net: 5-Dec-92 #9221
Date: Sat Dec 12 08:25:49 1992
#######################################################################
#######################################################################
#######################################################################
#######################################################################
#######################################################################
#######################################################################
##########(((((((((( ##########((( ##(( ##((((((( ##(((((((( ##########
#################(( ####(( ####(((( #(( ##(( ##########(( #############
##############(( #####(((((( ##(( (( (( ##((((( #######(( #############
###########(( ##########(( ####(( #(((( ##(( ##########(( #############
##########(((((((((( ##########(( ##((( ##((((((( #####(( #############
#######################################################################
#######################################################################
#######################################################################
#######################################################################
#######################################################################
#######################################################################
Z*NET: ATARI ONLINE MAGAZINE
----------------------------
December 5, 1992 Issue #21 Volume 7, Number 21
Copyright (c)1992, Syndicate Publishing Company
~ Publisher/Editor..........................Ron Kovacs
~ Senior Editor..............................John Nagy
~ Assistant Editor...........................Ed Krimen
~ Writer............................Michael R. Burkley
~ Writer.....................................Bob Smith
~ Z*Net News Service NZ.....................Jon Clarke
$ GEnie Address..................................Z-NET
$ CompuServe Address........................75300,1642
$ Delphi Address..................................ZNET
$ Internet/Usenet Address................status.gen.nz
$ America Online Address......................ZNET1991
$ AtariNet Address...........................51:1/13.0
* Z*Net: News Service FNET 593 AtariNet 51:1/13 (908) 968-8148
* Z*Net: Golden Gate FNET 706 AtariNet 51:1/9 (510) 373-6792
* Z*Net: S. Pacific FNET 693 New Zealand
**--CONTENTS--**
- The Z*Net Newswire................................
- First RTC From Hong Kong On GEnie.......Jon Clarke
- Perusing GEnie...........................Ed Krimen
- Z*Net Computer Calender.................Ron Kovacs
- The Unabashed Atariophile..........Michael Burkley
- Sales Door...........................Press Release
- The Tech Room...................AtariUser Magazine
- SCSI Backup for the Atari ST......................
###### Z*NET NEWSWIRE
###### Atari and Industry News Update
###### ---------------------------------------------------------------
SPECIAL LYNX PROMOTION ON NOW
Atari is just beginning an advertising campaign and offer for the Atari
Lynx Portable. For a limited time you can purchase an Atari Lynx for
just $79.95 and not even have to step out of your home to do so. By
calling (800) 327-5151, you can purchase an Atari Lynx, charge it to
your credit card and get FREE Federal Express delivery. You can call
until December 21, 1992 for Christmas delivery. This special Atari
offering will expire on January 31, 1993. For anyone without a credit
card, you can send a check or money order to Atari Lynx, PO Box 61657,
Sunnyvale, California 94088-1657. There are over 50 games currently
available for the Lynx.
INTERNATIONAL SOFTWARE CATALOG UG OFFER
The 1992 International Software Catalog (Item# C303288-001) is now
available from Atari Corporation. The catalog has more than 400 pages,
contains nearly 500 entries, and features almost 175 screen shots.
Categories covered include Publishing and Graphics; Multimedia and
Hypertext; Personal Productivity; Connectivity and Communications;
Music; Business; Education; Entertainment; Computer Aided Design;
Medical; Development Tools and System Software; and Peripherals. Atari
Falcon030 listings are also included. Along with the product
description the reader is provided with developer information designed
to help them acquire the product if it is unavailable from thier local
dealer. Suggested retail prices are also listed. If your local dealer
runs out of catalogs you may order your catalog directly from Atari by
writing to: Atari Customer Relations, International Software Catalog,
PO Box 61657, Sunnyvale, CA 94088. The price is $12.00 per book. Add
8.25% sales tax if ordering from California, Illinois, or Texas. Also
include $5.00 shipping and handling per order. Payment may be made by
check, money order, MasterCard, or VISA. (Allow 2-4 weeks additional if
paying by personal check) For a limited time, any registered user group
may purchase the catalog in lots of 10 books. When ordering a lot of 10
books the cost would be $10.00 per book plus $8.00 shipping for the lot.
FALCON PRICES
An Atari dealer in Wisconsin has released its prices for the Falcon030.
They report that initial machines will only be available with 4-meg RAM
and a 65meg internal IDE hard drive. Availability is expected in
December. Down payment is required for reservation, and first come,
first served. Falcon 1 Meg RAM, No Hard Drive $749, Falcon 4 Meg RAM,
No Hard Drive $929, Falcon 4 Meg RAM, 65 Meg Hard Drive $1199 and a
Falcon 14 Meg RAM, 65 Meg Hard Drive $1899.
WINTERTREE SPELLING SENTRY ANNOUNCED
Wintertree Software recently announced the release of Spelling Sentry
version 1.10. This new version incorporates many new features suggested
by Spelling Sentry owners. Spelling Sentry is a desk accessory that
adds spell-checking capability to virtually all other accessories and
GEM programs. A key feature of Spelling Sentry is its ability to detect
spelling errors in real time, while you type. It can also check disk
files and the GEM clipboard, and can expand abbreviations in real time.
Spelling Sentry's dictionary contains over 100,000 words. The price of
Spelling Sentry 1.10 remains at $59.95. Spelling Sentry is available
from Atari dealers, or directly from Wintertree Software Inc.
Registered owners of Spelling Sentry 1.00 get a free upgrade. Patches
to convert Spelling Sentry 1.00 to 1.10 are available on CompuServe and
GEnie. Or, you can send your original Spelling Sentry disk and a check
or money order for $3.00 to cover postage and handling. For more
information, contact: Wintertree Software, 43 Rueter St.Nepean, Ontario
Canada K2J 3Z9 (613) 825-6271.
OUTBURST 3.0 ANNOUNCED
OutBurST! is a program that reduces the time that Pagestream takes to
print data to HP LaserJet and HP Deskjet compatible printers. With
OutBurST! installed on your ST, the time to send a page of data to the
printer from Pagestream can be as short as 13 seconds! This compares to
times as long as 323 seconds using the standard built-in TOS routines.
Version 3.0 of OutBurST! contains a unique "Auto-switch" printer spooler
that can optimize not only your graphic output, but also text based
output. Also new to version 3.0 is a clearly written 16 page manual
that will lead you through the installation and operation of OutBurST!
Among the new features is the setup editor (OBSET) that will allow you
to set the spooler size and select programs that should not utilize the
spooler (Pagestream, Calamus, Touch-up, Desktop Publisher ST, etc.). If
you wish to override the automatic spooler status, the OutBurST! Control
Accessory can be used to change the setting while in any GEM
application. OutBurST! version 3.0 is available from: Straight Edge
Software, PO Box 6407, Nashua, NH 03061. To order send $25 plus $2
shipping and handling. If you are a registered user of previous
versions, send original disk and $10.
FTC CLOSES INVESTIGATION
The FTC (Federal Trade Commission) has closed a sweeping antitrust
investigation of Nintendo without taking any action against the
companies. The FTC opened its investigation in 1990 in an apparent
effort to determine possible validity in allegations in the media,
courts and Congress that Nintendo's success came about by monopolization
and other unfair methods of business competition. In September, the New
York Attorney General's Office closed its separate antitrust
investigation of Nintendo and in May a San Francisco jury vindicated
Nintendo in a monopoly action brought by Atari Corp.
WORDPERFECT SHIPPING VERSION 5.2
WordPerfect began shipping WordPerfect 5.2 for Windows, an upgrade to
WordPerfect 5.1 for Windows that began shipping a year ago. WordPerfect
5.2 for Windows ships with Grammatik 5 from Reference Software
International, as well as Adobe Type Manager and a selection of fonts
created specifically for WordPerfect. Other enhancements include a
graphical installation, better network installation, conversion for
Microsoft Word for Windows 2.0 and Lotus Ami Pro 2.0, and an enhanced
RTF conversion. The Speller has a simplified interface and also finds
and displays misspelled words and suggestions faster.
NINTENDO GAMES PIRATED
Nintendo stated this week that Hong Kong customs agents raided 40
wholesalers and retailers and three manufacturers of pirated Nintendo
video game cartridges. The raids, which took place between Nov. 24-29
and involved over 130 Hong Kong Customs officials, resulted in the
seizure of infringing video game cartridges and accessories, components
and containers for infringing video games valued at about HK $30
million, and 30 persons arrested.
NEW POLL SHOWS VIDEO GAMES TOP LIST
According to a Gallup Poll, a telephone survey of approximately 500
children, ages 7-16, 63 percent of responding children said they "really
want" a video game system for the holidays, followed by portable video
games (54 percent) and video game software (43 percent). Remote-control
vehicles ranked fourth in popularity (31 percent), just ahead of pre-
recorded video tapes (29 percent). Despite the winter weather, 28
percent said they really want a water gun, ranking ahead of board games
(21 percent). The North Pole Poll was conducted independently by The
Gallup Organization in November for Nintendo.
NEW MONTHLY CONFERENCES
Bob Brodie recently informed Z*Net about NEW monthly RTC's (Real Time
Conferences) that will take place on GEnie. The first Friday of every
month in the GEnie ST RT beginning at 10pm eastern. This series of
conferences are titled, Dateline: Atari.
AEO RETURNS
Atari Explorer Online Magazine will return December 5, 1992 with
exclusive COMDEX coverage by Bob Brodie, columns from other AEO regulars
Ron Robinson and Travis Guy.
###### FIRST RTC ON GENIE FROM HONG KONG
###### By Jon Clarke
###### ---------------------------------------------------------------
Over the last seven years I have been involved in the Banking Industry,
in a division called Electronic Banking. Basically this involves a
client of the bank communicating via a PC and a modem to the bank to
send and receive banking related instructions. Many of you may know of
it as some form of Electronic Cash Management, here in my bank we call
it Hexagon.
Recently I changed banks and was able to take a flying world trip around
the world to meet my offsiders and to learn about the banks products.
(This trip was in Z*NET International 1991) Being able to take this
opportunity to travel to countries I would other wise never visit I
decided it would be a great idea to keep in contact with my household as
well as my many friends in the Global Village via the GEIS network,
GEnie.
This I did with great success in the United States, United Kingdom
(London), and from Frankfurt in Germany. (A belated thanks Mike) The
last part of the trip took me to Hong Kong and our Head Office (I work
for HongkongBank, the tenth largest bank in the world). While I was in
Hong Kong I was able to logon to GEnie via the Local GEIS ports (as most
users in the USA do on a daily basis) after a quick call to GEIS HK to
have the port BAR removed.
Well here we are now some 13 months later and it is time for our annual
Hexagon Conference in Hong Kong. Having connected to GEnie last year
from Hong Kong, I decided it would be a great idea if we could get a
RoundTable Conference (RTC) going in the Atari section this time. So I
dropped some email to Darlah the Chief bottle washer and Head Sysop of
the Atari RoundTables. I pointed out to Darlah apart from my email and
posting to the Atari Bulletin Board (BB) on GEnie last year a live RTC
from Hong Kong would be a real first for GEnie. Firsts are something in
this day and age there are not a lot left to do.
With the banner placed on the Atari RT front door and my plane tickets
burning a hole in my pocket, on Sunday the 18OCT92 I was off for an
eleven hour flight to Hong Kong.
I left here (New Zealand, next stop the South Pole) on a very nice
spring day, sunny and 15 degrees Celsius. When I arrived six hours
after I left home (time zones are great things) it was 26 degree Celsius
and the beginning of winter. I wish our winters were as warm.
I went through immigration and customs without to much hassle and headed
of to the hotel on Hong Kong Island. I think I should point out here
very quickly a few little points about Hong Kong.
- Hong Kong is made up of Hong Kong Island, Kawloon and the New
Territories governed as a protected territory by the United Kingdom.
- Population is about 6 million in the size of Lake Taupo (look on your
globes, maps, at middle of the North Island of New Zealand)
- Work hours (average) 9am to 6pm Monday to Saturday (9am to 1pm)
- One US Dollar equals roughly seven point eight Hong Kong Dollars
($USD1 = $HKD7.8)
- There is nothing you can not get in Hong Kong except fresh MILK
(grin)
- They have some of the best telecommunications in the world, from X25
to Satellite TV (Star TV in NICAM Stereo, I loved it)
- The time difference is 12hours ahead of Eastern Standard Time (sorry
Darlah)
- They play a great game of Rugby not NFL!
I saw some friends on Sunday night and arranged to be in the office
early next morning to test the local GEIS PADS. I had to be at another
office where I had a two day attachment prior to the conference which
started on Wednesday, by 9:30am.
So it was a flying trip to our Group Head Office Global Electronic
Banking centre and onto a terminal and there I was calling GEIS HK at
8am on Monday morning. All is well I thought, up came the CONNECT 2400.
Now I thought remember the HHH (we do not do this on PDN connections to
GEnie). So it was HHH and there was home the "U#" prompt.
I entered in my ID and PASSWORD, up came the Welcome to GEnie and I let
out a big sigh of relief as it was going to work for tomorrows RTC.
Then up came the tell tale local access bar *LOCAL CALL PROHIBITED* .
"Ah heck" were not quite the first words I uttered but I knew this may
happen. So with the help of Owen Choi (Chief Wizz kid and all round
nice guy) we managed to get a hold of Mr Sze Wai (pronounced C Y) Leung,
Manager of Client Services and Development at GEIS Hong Kong (HK). I
told Sze Wai of the problems I was having but alas he could not
understand what I was referring to. (ever had a day you should have
stayed in bed?)
I explained at great length the problem was at the GEIS HK local port,
it had a bar on it and he could remove it in about ten minutes. I will
give Sze Wai his credit as he is a customer service person and not a
telecommunications techo. He said he would get in contact with their
(GEIS) techo's and I could ring back in 30 minutes.
"Ah heck " for the second time in 10 minutes came the cry.
I was now overdue for my attachment so I suggested he call Owen and I
would pop back at lunch time and give it another go. He told me "no
problems" it will all be sorted out by then and I can relax. (Just what
I needed to hear).
Twelve o'clock came and I shot upstairs (18 stories) and asked Owen what
the outcome was? He said it was all go but he could not try it as I
took my codes with me (opps). So we popped on and the same problem
again. Now I have a loooooong fuse but this was getting to me a little
to say the least. So another call and this time we had the techo's
monitor my call and logon to GEnie.
They (GEIS Techo's) saw the problem, great but it was afar as they were
concerned was a USA problem not a Hong Kong problem.
After ten minutes of me saying it is a Hong Kong problem and them saying
no it is a USA one I gave up and asked how they can fix it. They said
they would have it all fixed by 4pm and I should try then. At this
point I suggested if they can not fix the local pads I would need to be
in their office by 9:30am the next morning to do the RTC from there.
Sze Wai said "OK, but you will not need to." (grin.. hind site is a
great thing!)
Come 4pm on Monday afternoon, we were still no where and the ports were
still barred. However Sze Wai mentioned GEIS had on-sold the GEnie
access to the local carrier in Hong Kong, Hong Kong Telecom, Datapak.
There was it turned out X25 access to GEnie and I could access via
Datapak as a last resort.
Great, success at last I thought. But we did not have the Datapak login
code (Network User Identification, NUI) and after a quick call to
Datapak it would take 3 weeks to get one (why did I get up today?) We
rang GEIS and told them of our demise and they suggested we go over to
their offices in the morning and do it all from there.
At this point a simple RTC was turning into a nightmare, as Sze Wai also
mentioned he had not been notified by GEIS USA about this access and now
needed a fax or PC MAIL to say it was OK for me to do this RTC from
their offices in HK.
So with an appointment at 6pm pending I rang Darlah in the United States
and woke her up as it was only 5:55am EST. After getting down on bended
knee over the phone and apologizing for waking her up at this ungodly
hour, I proceeded to spout forth what had transpired with GEIS HK I then
asked if she could arrange for a fax to GEIS HK and GEIS OZ with all the
RTC details.
I would like to state for the record my sincere thanks to Darlah for her
help, and Nathan yes she does sound a million dollars at 6am (grin).
Well I missed my 6pm appointment needless to say, so a group of us
decided to go and visit the old computer haunts in Kawloon. Brain and
Linda from London along with Isabel from the Channel Islands joined us
and we set forth to Sham Shu Po on the MTR (subway).
Now imagine if you will a small three story shopping mall full with not
20 not 100 but in its heyday 1200 computer stores.
The Golden Shopping Centre has long been a Mecca to computer users of
all sorts for many years. They deal with every thing from Game Boys,
cd-roms, software, hardware, and every conceivable computer related item
and part in between. All the latest computers are on show and for sale
either as a complete unit or as sub systems.
I liken this and the Mong Kok computer centres as the closest thing to
computer heaven there is on earth. (I think this about covers it)
Want software.. OK what do you want it for. Remember like many
countries most of it is targeted at the IBM and clone markets but a
sample of things catered for are ..
- MS-DOS - Windows - OS/2 - Unix - Mac
- Atari (16bit an 8Bit) - Amiga (16bit and 8bit)
- Hand held games machines - Gameboy, Lynx and many more
- Home Games consoles 2600 and many more
What sort of software do you want
- Word processors - Communications - Games
- CAD - Utilities
- etc etc etc etc etc etc etc
When do you want it? Did I hear you say "WHAT?" Yes it is a sad fact
but a lot of the software, manual and hardware for the matter are
pirated! Produced while you wait for an average of $USD3 to $USD10 per
package. Don't get me wrong here NOT all places are doing this just a
few.
What hardware do you want? Want a cloned or as the chap said "a
reversed engineered MAC " for 2/3rds of the USA price. The hardware is
very good value indeed. I brought a modem, mouse and a few other bits
and pieces for the systems here at home at 2/3rds the local retail
price.
I am not going to spring any revelations on you here but if there is
anything you want I suggest it is only a matter of looking for it. (See
the GEnie ATARI RTC file for more details)
After four hours of touring Sham Sho Poo we headed to Mong Kok and then
off to Jordan to the "Night Markets". A few thousand Hong Kong Dollars
later I was back in the hotel room hoping that Darlah and GEIS USA had
managed to get the fax off to Hong Kong.
My early morning call duely arrived and I was off to work. A quick call
to GEIS HK and yes they had received the fax and were expecting me down
at Taikoo Shing at 9:30am.
I had a local chap assigned to me to get there and off we went. A $HK80
taxi ride later we arrived. If I did not have the local chap I would
have been lost as GEIS are on level 9 and access is from level one.
When I did arrive at the reception desk I must say I was surprised
indeed. My hats off to the GE management for the presentation of their
reception area. A big marble GE behind the receptionist certainly set
the flavour of this operation.
Sze Wai arrive and asked me to follow him to his office. Here he has
set up a PC, modem and the old reliable GE software "TSI" (yuck I
personally hate TSI- Time Share Interface).
A quick call to Datapak, and after entering the NUI here is what
appeared ..
Datapak: call cleared - remote request Datapak: 5500 066
Communications disconnect
Error code = 5060
NO CARRIER
Opps, what was happening? After another re-try we were on GEnie and
underway with the RTC. I would like to apologize for my typing on the
RTC at this point. I often make mistakes when typing and rely heavily
on the delete or backspace key (don't we all?) and this version of TSI
did not have one nor did have a chat option so I lost where I was typing
a few times.
Lou managed to get ahold of me and we were underway with the RTC for
just over an hour and a half. (see transcript for details)
I would like to thank the following people for allowing me to get the
RTC from Hong Kong together after a nerve racking 24hours..
- Darlah Potechin Atari RTs
- Nathan Potechin
- Mr Sze Wai Leung Manager GEIS HK
- The staff of GEIS Hong Kong
- Mr Jim Starr, GEIS Network Manager Sydney Australia
- The GEnie crew.
- The GEB crew at HSBC GHO
###### PERUSING GENIE
###### Compiled By Ed Krimen
###### ---------------------------------------------------------------
Some messages may have been edited for correct spelling, grammar, and
irrelevant material.
GENIE POST OF THE YEAR
----------------------
-=> In the "Atari Magazines" category (15)
-=> from the "Z*Net Atari Online Magazine" topic (9)
Message 12 Sun Nov 29, 1992
S.WINICK at 06:39 EST
Bob, Thanks for clearing up the FCC certification questions. It's great
to have you back online on a regular basis once again, providing
everyone with accurate and timely information. Of course, I'm sure the
instigators of the rumor mills will just look for other areas to find
criticism and frustration.
Giving Atari's Director of Communications back the ability to do his job
most efficiently and provide the Atari community near instant
accessibity through the online services is definitely another move in
the correct direction.
I did a demo for a nice couple who came in yesterday looking for a new
PC-clone to replace their aging 286. Of course they were drawn to the
PC-cludge we keep on hand for just that occassion. And, like the
typical PC shopper, they of course "didn't want an Atari". As the
discussion progressed, they eventually got around to asking my opinions
on various aspects of hardware and software and when they discovered
that I really "used" the Atari platform myself for everything, asked to
see one. ;-]
Needless to say, by the end of the session they, like the large majority
of shoppers we see, kept asking over and over again why Atari doesn't
let everyone know about their systems. They were blown away by the TT's
power and speed. How 'bout Word Perfect? Click.... there it was. How
'bout Lotus123. Click.... there was LDW Power! How 'bout desktop
publishing. Click.... there was Calamus. Goodness... look how fast and
it's REALLY What You See is What You Get! Oh, but printing on their
laser printer at work takes forever. Click.... now watch this......
<grin>, How long does that flatbed scanner take to scan in a page......
click..... <another grin>. How 'bout graphics and sound? Click.....
Oh, but he has to do some CADD work also. <biggest grin of the day>
Click..... DynaCADD! Ah, but how much does that 19" TTM195 montor cost
and how much does the graphics card cost that must also be needed? <yet
another big grin>. What, "you mean to tell me that's a STANDARD monitor
for this system?"
As usual, they left believers! The systems are great; always have been.
The problem has always been in finding an effective means of making them
visible and accessible to the public. Getting the information out....
that's part your job, Bob. As Director of Communications you must be
allowed to communicate! It's great to see that you're once again being
allowed to do that job in the most effective manner.
Welcome Back!!
Sheldon (IADA/Computer STudio - Asheville, NC)
=======================================
350,000 BIRDS?!
---------------
-=> In the "Atari Corporation Online" category (14)
-=> from the "Atari Falcon 030 Computer" topic (20)
Message 85 Fri Nov 27, 1992
BOB-BRODIE [Atari Corp.] at 18:22 EST
I'm a little at a loss where the current projections of Falcon
production is coming for? Who's the source for this rumor??? Our
production forecast is for approx. 350,000 machines for 1993. Half of
those are earmarked for the US. Crunch all you want, and we'll make
more.
:)
Re the PC emulator for the processor slot...the one that was shown at
COMDEX was an early working prototype of a 286. The 286 version will be
sold very inexpensively, and there will be a 486SX version available by
January. In color.
regards,
Bob Brodie
=======================================
I WANT MY ATARI EXPLORER!
-------------------------
-=> In the "Atari Corporation Online" category (14)
-=> from the "Atari Explorer" topic (30)
Message 112 Fri Nov 27, 1992
S.JOHNSON10 [Steve] at 04:33 EST
I know there are changes going on, but WHEN will Atari Explorer resume
publishing and ON A REGULAR (bi-monthly) BASIS?
----------
Message 113 Fri Nov 27, 1992
EXPLORER.1 [ Ron ] at 15:40 EST
Steve, The objective is to get Explorer back on a regular publishing
schedule early next year. The first Lindsay/Meers issue is at the
printers now. Articles for the following issue (MIDI theme) are in edit
now, and planning is taking place for the third issue.
I know the delays are frustrating but everyone really is doing the best
they can to get things back on track. The patience of our subscribers
is very much appreciated.
Ron @ Atari Explorer
=======================================
BITSTREAM SPEEDO
----------------
-=> In the "Atari Corporation Online" category (14)
-=> from the "Speedo GDOS" topic (35)
Message 62 Fri Nov 27, 1992
EXPLORER.5 [Bob] at 17:07 EST
Bob, I agree with your headache over yet another proprietary font
system. It's an old story, however, and the argument in favor of a
unified font system doesn't seem to have made much impression on
developers.
Until now. Bitstream Speedo fonts are not proprietary in the sense that
only a limited number of applications use them. Bitstream is an
established font foundry that has a wide enough market base to provide
some security in the format. Bitstream provides _real_ support to
application developers wishing to access their fonts. Calamus probably
won't support Speedo format, but I'll bet real money that PageStream
does.
Now here's where the GDOS concept shows its beauty, maybe the only
beauty it has. Any application that supports GDOS doesn't have to go
through the development cycle to support scalable Speedo fonts. Once
Atari releases the new GDOS, applications such as Wordflair can
immediately use the new fonts, including any fonts you can get from
third parties.
I'll agree that using the Speedo format instead of the more common Type
1 format may be questionable. The only reason I can think of for doing
that would be to improve screen display speed, and there hasn't been an
asnwer from Atari on that yet. But it's better than using Imagen's
format, and better than anything we've had before.
Now all Atari has to do is actually release a working version.
Hopefully soon.
=======================================
WHERE'S THE LYNX?
-----------------
-=> In the "Lynx - The Game Machine" category (36)
-=> from the "General Lynx Info And Discussion" topic (5)
Message 61 Mon Nov 30, 1992
S.JOHNSON10 [Steve] at 01:54 EST
Well, it's the end of the BUSIEST shopping weekend of the year and my
local Toys 'R' Us (Atari's seemingly 'pride & joy' of Lynx outlets)
STILL has no Lynxes to sell (and hasn't for at least 2 1/2 MONTHS). I
guess it's about time I sell mine while it's still worth something???
And yes, I'm a bit pissed off. Things like this don't make me feel any
more optimistic about Atari management FINALLY getting the hang of how
to run a company.
----------
Message 62 Mon Nov 30, 1992
REALM [Joey] at 04:39 EST
Steve, No offense, but how is the lack of Atari management even remotely
related to your happiness with the Lynx? Atari could fall over dead
tomorrow and I'd still be playing mine. I've already had enough fun to
cover the cost. If you've played it 15 or 20 hours it's already cheaper
per hour then going to the movies.:-)
----------
Message 63 Mon Nov 30, 1992
FAIRWEATHER [David] at 10:16 EST
Right now, Toys R Us in Ventura, CA actually has their best selection of
Lynx machines and carts since they started carrying the Lynx, so I don't
think you can generalize too far from your local store, Steve.
----------
Message 64 Mon Nov 30, 1992
D.ENGEL [Thunderbird] at 18:25 EST
It really sucks to get a Toys R Us flier in the paper twice a week or
more, with whole pages taken up by the Game Toy and another two page
spread of the Game Gear, and no sign of the Lynx.
I understand that these fliers are paid for by the companies whose
products are being featured, and do not reflect the attitudes of the
Toys R Us staff. In other words, Sega and Nintendo pay Toys R Us to
place the ads in their flier.
Don't complain to the store if you don't feel they are giving the Lynx a
fair shake. They are. Someone else is at faultless.
----------
Message 65 Mon Nov 30, 1992
T.MCCOMB [=Tom=] at 18:35 EST
That really is a silly position. Umm, err, then again... Say, Steve,
I'll pay you $30 for that worthless LYNX system you have there. Yeah,
that's the ticket!
Say they may go belly up next week... it's value could drop to $10...
Better jump on that $30 offer!!
----------
Message 66 Mon Nov 30, 1992
JOHN.KING.T [JOHN KING T] at 21:37 EST
Steve, I was at my local Toys R Us this weekend in Burbank, CA. They
DID have LYNX's in stock. I looked behind the "cage" and my guestimate
was about three dozen.
The Babbage's in my local mall in Glendale, CA has given the LYNX
priority over the other hand-held game systems by putting the LYNX "up
front." The Electronic Boutique, in the same mall, even has a custom
LYNX sign.
I guess you don't live in the right part of the country.
=======================================
###### THE Z*NET COMPUTER CALENDAR 1992-1993
###### Schedule of Shows, Events and Online Conferences
###### ----------------------------------------------------------------
### December 4-6, 1992
The Computer Graphics Show 1992 at the Jacob Javitz Convention Center
in New York City. This is a CMC event. For more information call;
(203) 852-0500, extension 234.
### December 12, 1992
Lake County Atari Computer Enthusiasts (LCACE) will hold the 1992 LCACE
Christmas Party and Swap meet. It will be held in the Auditorium of the
Waukegan Public Library on County Street in Waukegan. The LCACE MIDI
sig is planning a "jam session", there will be a door prize raffle, and
games and other activities for everyone. In addition to the party,
there will be a hardware and software Swap meet. No admission and No
table charge! Doors open at 1:00pm. For more information information,
call Pegasus BBS at 708-623-9570.
### December 15, 1992
Zenobot, GEnie user and writer for AtariUser Magazine and publisher/
Editor of the ST Gamers Digest Online Magazine will be the GEnie ST RT
guest for a night of game discussion. Zarth will answer your questions
concerning which games to buy for Christmas. This conference begins at
10:00pm EDT.
### December 20, 1992
Eugene, Oregon. Atari SWAP MEET planned at the GATEWAY MALL MEETING
PLACE. The hours have not been finalized yet but tentively they will be
10am - 5pm. There may be a small admission fee this year (no more than
$1.00) and there may be a table fee.
### December 24-25, 1992
Christmas 1992! Spend time with your loved ones! Hope you bought an
Atari product for your favorite person!
### December 31/January 1,1993
New Years Eve, New Years Day! Happy New Year! Make those resolutions
stick this time around!
### January 4, 1993
Dateline: Atari RTC on GEnie. Bob Brodie will be the guest speaker at
this regular monthly ST Roundtable conference. Scheduled start times
for all GEnie conferences are 10pm EDT.
### January 6-9, 1993
MacWorld Expo in San Fransisco California, Sponsored by MacWorld
Magazine. Titled San Fransisco '93 at the Moscone Center.
### January 7-10, 1993 (Corrected Date)
The Winter Consumer Electronics Show comes to Las Vegas, Nevada. CES is
an electronic playground, with everything in the way of high tech toys
for kids and adults. Game consoles and hand-held entertainment items
like the Atari Lynx are big here, and Atari will attend with a hotel
suite showroom. Contact Atari Corp for more information on seeing their
display at 408-745-2000.
### January 12-14, 1993
Networld '93 in Boston, Massachusettes
### January 15-18, 1993
NAMM is the largest conclave of musicians each year. Held in Los
Angeles at the Anaheim Convention Center, the variety of sights at the
National Association of Music Merchandisers is wilder than at
Disneyland, just next door. Atari was the first computer manufacturer
to ever display at NAMM in 1987, and has become a standard at the shows.
A trade show for music stores, distributors, and professionals of every
strata, entertainers are seen everywhere at NAMM. Contact James Grunke
at Atari Corp for more information at 408-745-2000.
### February 2-4, 1993
ComNet '93 in Washington, DC.
### March 1993
CeBIT, the world's largest computer show with 5,000 exhibitors in 20
halls, is held annually in Hannover, Germany. Atari traditionally
struts its newest wares there, usually before it's seen in the USA or
anywhere else. In '93, the Atari 040 machines should be premiering, and
this is the likely venue. Third party developers also use this show to
introduce new hardware and software, so expect a wave of news from CeBIT
every year. Atari Corp and the IAAD coordinate cross-oceanic contacts
to promote worldwide marketing of Atari products, and this show is an
annual touchstone of that effort. Contact Bill Rehbock at Atari Corp
for information at 408-745-2000.
### March 13-14, 1993
The Sacramento Atari Computer Exposition is to be sponsored by the
Sacramento Atari ST Users Group (SST) at the Towe Ford Museum in
Sacramento, California. This show replaces the earlier scheduled, then
cancelled Northern California Atari Fest for the Bay Area, to have been
held in December 1992. A major two day effort, the SAC show is being
held in the special events area of the Towe Ford Museum, home of the
worlds most complete antique Ford automobile collection. As an added
bonus, admission to the museum is free when you attend the Expo. The
museum is located at the intersection of Interstates 5 and 80, just 15
minutes from the Sacramento Metropolitan Airport. Contact Nick Langdon
(Vendor Coordinator) C/O SST, P.O. Box 214892, Sacramento, CA 95821-
0892, phone 916-723-6425, GEnie: M.WARNER8, ST-Keep BBS (SST) 916-729-
2968.
### March 21-24, 1993
Interop Spring '93 in Washington DC.
### August 3-6, 1993
MacWorld Expo at the Boston World Trade Center, Bayside Exposition
Center and sponsored by MacWorld Magazine. This event is titled Boston
'93.
### September 18-19, 1993
The Glendale Show returns with the Southern California Atari Computer
Faire, V.7.0, in suburban Los Angeles, California. This has been the
year's largest domestic Atari event, year after year. Contact John King
Tarpinian at the user group HACKS at 818-246-7286 for information.
### September 20-22, 1993
The third MacWorld Expo, titled Canada '93 at the Metro Toronto
Convention Centre, sponsored by MacWorld Magazine.
### September 21-23, 1993
Unix Expo '93 in New York City, New York.
If you have an event you would like to include on the Z*Net Calender,
please send email vai GEnie to Z-NET, CompuServe 75300,1642, or via
FNET to node 593 or AtariNet node 51:1/13.0
###### THE UNABASHED ATARIOPHILE
###### By Michael R. Burkley
###### ---------------------------------------------------------------
I survived my vacation. To keep the peace in my family I didn't even
take my ST along ("Greater love has no one than this...). I have to
admit though, that the morning after I arrived in Saugus, MA found me in
the local Lit'l Peach perusing the magazine racks. I finally found what
I was after--a copy of "The Want ADvertiser." I bought it "just in
case" there were some good deals to be found. When I brought it home my
wife's only comment was "I expected as much."
Have you ever noticed that there are loads of used IBM's, Mac's, and
Amiga's for sale, but not many ST's? Of course, part of that just might
be that there are fewer ST's out there to start with, but I think that a
major factor in that dearth of used Atari's is that once a person grabs
on to an ST he or she tends to hold on to it!
This week I thought I would write about a series of programs by Uncle
Carl, or as the world at large knows him, Carl J. Hafner. Uncle Carl is
a capable and multi-faceted individual. He is a performing musician,
the owner of a music business, a nice guy, and much more. Part of the
"much more" is that he programs his ST using GFA Basic, and he shares
his programs with others. I am personally aware of over 26 programs and
files that he has produced (he updates them continuously as well).
Ranging from time traveling detective text adventures to GFA Programming
helps, to superb applications like his disk librarian or Hard Disk
security system, these programs show his wide range of interests and his
considerable skills in programming (and excellent imagination as well!).
Have you ever used one of those programs that (supposedly) allow you to
convert all of your archived files to another format, only to find out
that the program didn't work? That's because most (if not all) of such
programs before now were tied to a specific version of an archiver.
BELEF (pronounced: BELL*EFF) is Uncle Carl solution to that problem. He
has created a program that will work on compression programs past,
present, and future. Now if you have a zillion ARC (or other format)
files and want to save space you can just convert them over to LZH with
minimal effort. Docs included. SHAREWARE.
Another useful program, especially for you musicians out there, is
MidiNote v.1.6. MidiNote displays incoming MIDI notes, pressure,
program change, pitch bend, channel and sustain. This can be useful for
determining MIDI values from within programs which do not display this
information until you've already recorded something. It works as either
a program OR accessory, in ALL resolutions, and can be repositioned
anywhere on the screen so that it does not interfere with the screen
information you may need. ST/STe/TT compatible (includes TOS 2.06).
SHAREWARE.
Ocultar v.2.5D is a program that will protect your Hard Disk from
unauthorized access through the use of a User Defined Password. You can
make your disk _secure_ if you want. No one is getting into your
computer if they don't have the password. This version adds a new even
more feature-packed interface that allows up to 10 users with their own
passwords, bootup configuration and file maitenance options. Color or
mono. ST/STe/TT (in ST rez) compatible (this includes TOS 2.06). Docs
included. SHAREWARE.
The final utility program I'll mention (though he has written many more)
is UNCLE v.3.8D. This is a fully working copy (NOT a demo) of Uncle
Carl's Famous Disk Librarian Version 3.8D (revised April 17, 1992 to
make it ST/STe/TT, TOS 2.06 compatible in all ST rez). Uncle Carl's
Famous Disk Librarian, is a SHAREWARE disk cataloging utility. This is
simply the most capable disk librarian that I have ever seen. It does
everything you want it to do (that is, in regard to disk cataloging!).
It allows you to SHOW or PRINT COMPLETE disk directories. Selectively
search through drives A-P. You can SAVE the information you retrieve to
any of 3 file types, all of which are saved in ASCII format! He has
even included a full Text Editor! The original description I wrote went
on for two pages! I highly recommend this file. Color or mono. Docs
included.
I don't want to give the impression that Uncle Carl has only written
serious, hard-working applications. He also lets us have a lot of fun!
Here are some of my favorites among the many he has written.
CopyCats 2 is a "Simon" type game in which you are challenged to mimic a
computer generated sequence of selected boxes. Difficulty levels and
presentation speeds are ALL user definable, making it absolutely
impossible to lose all the time! CopyCats can also be picked up and
moved anywhere on the screen. ST/STe/TT compatible (TOS 2.06, too!) in
all ST/TT resolutions.
"A Journey In The Past," is the first adventure in the Grampa Howard
Mysteries. In this program you are transported 100 years back in time
in an attempt to help Grampa Howard find and defeat Dr. Malvert. All is
not as it seems however, due in part to the time displacement drag
coefficient (of all things). Therefore, what seems to be obvious may
not be that way at all! This text adventure makes you work! I like it!
SHAREWARE.
MIDI Strobe Version 1.4 is a program that interprets a note on/off
command as an instruction to generate a random color. Therefore, the
faster you play, the faster the program changes the screen's colors. It
will run on a color or mono ST (but the color changes do get boring with
a mono monitor!). It requires a MIDI keyboard to be connected to your
ST to run.
That's it for this week! What are your favorite PD/Shareware programs?
Please let me know. I'm always looking for programs to boast about.
After all, I'm the _Unabashed_ Atariophile! It's time to fire up the
modem and send this off.
###### SALES DOOR V4.00
###### Press Release
###### ---------------------------------------------------------------
(c)1992, PERIGEE SOFTWARE CORPORATION
The On-Line Sales Door Perigee Software Corporation
The The On-Line Sales Door is a software package that allows people to
remotely access your computer's database of information with their
computer, a modem and a telephone line, without leaving the comfort of
their home or office.
They have the ability to view pictures of what is in your database,
place orders (if you install it as an on-line sales system), and obtain
as much detailed, visual and/or text information that you would like to
present to them.
This software package can help you open up a world of contacts and
customers that you never dreamed of being able to reach before. It's
inexpensive, easy to install, and a snap to use, even if you have no
data communications experience.
For you more technically inclined individuals, the software was
programmed using a combination of Turbo Pascal *, QuickBasic *, BTrieve
* Btree * and Assembler *. It has a fully functional relational
database, is Novell and DOS Share * compatible, supports high-speed data
transmission and operates in the MS-DOS * environment.
Minimum hardware requirements are as follows :
DOS v 3.3 or higher
512K FREE conventional memory
40 MB Hard Drive
4 MB must be free to install to the hard drive
Monochrome monitor with ANSI loaded
Features and Benefits :
Handles Up To 10 Telephone Lines Before Upgrade Required
High Resolution Item Picture Viewing
Unlimited Item Database Capacity
On-Line Order Placement
Downloading of Orders
Keyword and Category Searching
Automated Credit Card Verifications
Multiple Tax, Freight and Weight Calculations
Automatic Printing of Orders/Invoices
Multi-Node and Network Compatible
Multiple Languages Supported, English, French, etc.
Stores and Retrieves Customer Data On-Line
High Level of Security
24 Hour Order Taking Capability
Customer Product Browsing at their leisure
Minimal Staffing for Inquiries and Order Taking
Multiple Tax Tables and "Foriegn Order Awareness"
User Definable Invoices
Automatically Detects Your Systems' Hardware Upon Install
For More Information, Contact Perigee Software Corporation
Tel (416) 444-2290
BBS (416) 444-7358
ADDITIONAL FEATURES
Other functionality, too extensive to detail here, includes multicountry
tax tables, full relational database technology, user controllable
installation and configuration, full mouse and modem support,
maintenance and conversion programs for database management, multikey
search capability, and a complete online help system. The commercial
version of the product comes with bound manual and a full one year
telephone support service.
Another big plus to our system is that it has been in the 'shareware
world' for the past four years and is viewed there as one of the best
products of it's kind. It is because of this response to our product
that has lead us to the decision to produce a commercial version as well
this year. We still continue to enjoy a large success in the shareware
world, hence this documentation refers to both versions of the software.
SALES DOOR BBS SUPPORT
The following is a list of BBSes now directly supported by both
VisuaLink Database System and The On-Line Sales Door.
Should your BBS be one of the systems that does not support User
Membership Upgrades and/or Message Base Access, please contact THEM and
ask their techinical support staff to supply us with the database
structures for their user and message databases. We will attempt to
include this functionality in future releases.
COMPATIBILITY
No Door Manager Required, Supports BBS User Membership Upgrades On-line
and Message To Sysop That Orders Have Been Placed.
BBS Type File Used
======== =========
PCboard 14.x PCBOARD.SYS,PCBOARD.DAT
Feathernet PCBOARD.SYS,PCBOARD.DAT
QuickBBS 1.0x - 6.2x DORINFO1.DEF
RemoteAccess 1.10/1.11 DORINFO1.DEF
RyBBS CURRUSER.BBS
SuperBBS DORINFO1.DEF
Telegard BBS DOOR.SYS
Wildcat 3.xx DOOR.SYS
QuickBBS 2.75 DORINFO1.DEF
Swift BBS DORINFO1.DEF
Supports BBS User Membership Upgrades BUT NO Message Importation
BBS Type File Used
======== =========
GAP Communications DOOR.SYS
NO BBS User Membership Upgrades AND NO Message importation
BBS Type File Used
======== =========
PCBoard 12.x PCBOARD.SYS,PCBOARD.DAT
2AM-BBS JUMPER.DAT
Auntie BBS AUNTIE.SYS
Doorway (All Versions) DOOR.SYS,GRAPHICS.SYS
EIS-PC DORINFO1.DEF
Emulex PCBOARD.SYS
FCP/Emulex PCBOARD.SYS
Fido BBS DOOR.SYS
Force! (tm) DOOR.SYS
FoReM DORINFO1.DEF
Forum-PC USERINFO.TXT
GT Power Host GTUSER.BBS
Genesis Deluxe CALLINFO.BBS
Magpie DOOR.SYS
Maximus 2.0 DORINFO1.DEF
Milton Gameworks USERINFO.TXT
ModuleX NUMBER.TXT
Odessey BBS NUMBER.TXT
Omegacom BBS DORINFO.DEF
Opus-CBCS DOOR.SYS
Phoenix RCS INFO.BBS
PILOT BBS CHAIN.TXT
Professional OLEcom DORINFO1.DEF
RBBS-PC16.x DORINFOx.DEF
RBBS-PC17.x DORINFOx.DEF
Searchlight BBS PCBOARD.SYS
Spitfire BBS SFDOORS.DAT
TAG BBS DOOR.SYS
TP-Board DORINFO1.DEF
Wildcat 1.xx CALLINFO.BBS
Wildcat 2.xx CALLINFO.BBS
WWIV CHAIN.TXT
XBBS USERINFO.XBS
DCI DORINFO1.DEF
MaxiHost DORINFO1.DEF
Osiris DOOR.SYS
Executive Host DORINFO1.DEF
TriTel TRITEL.SYS
PowerBoard BBS DOOR.SYS
Citadel BBS (TurboCit) OUTPUT.APL
Citadel BBS (FredCit) OUTPUT.APL
Virtual BBS CHAIN.TXT
TriBBS 3.0 DOOR.SYS
Boyan DOOR.SYS
Dark Star PCBOARD.SYS,PCBOARD.DAT
Eazi Host DORINFO1.DEF
Fornax DOOR.SYS
GS BBS Ver 3.02 DORINFO1.DEF
JDR BBS PCBOARD.SYS,PCBOARD.DAT
Lora BBS DORINFO1.DEF
LA - BBS DORINFO1.DEF
Mach-10 DORINFO1.DEF
Max!BBS DOOR.SYS
MaxiHost DOOR.SYS
MegaHost DOOR.SYS
ProBBS PCBOARD.SYS,PCBOARD.DAT
ROS BBS DOOR.SYS
ROVER BBS PCBOARD.SYS,PCBOARD.DAT
TurBoard DORINFO1.DEF
TPBoard DOOR.SYS
Ultra BBS CALLINFO.BBS
ProBoard BBS DOOR.SYS
###### THE TECH ROOM
###### Reprint from October AtariUser Magazine
###### ---------------------------------------------------------------
The following article is reprinted in Z*Net by permission of AtariUser
magazine. It MAY NOT be further reprinted without specific permission
of AtariUser. AtariUser Magazine, 249 North Brand Boulevard, Suite 332
Glendale, CA 91203 Telephone/Voicemail: 818-246-6277, FAX: 818-242-2129
"Thanks for the memories...."
Have you heard terms like cache memory, TT fast memory and TT slow
memory, and wondered what they meant? Well, they aren't really hard to
understand, and knowing what they mean will give you a better feel for
how your Atari computer works.
Several kinds of memory reside in your Atari ST or TT, and the computer
moves information from one kind of memory to another. The information
stored and moved makes up both programs and the output data of those
programs. Inside the computer there are also permanent programs, called
the operating system. In Atari's case, it's named TOS ("The Operating
System" or "Tramiel Operating System", your choice).
TOS is built into a kind of memory called read-only memory (ROM), which
may be read but not rewritten. It was set up at the factory, and can
never be changed except by chip replacement. The rest of the memory in
you computer is "random access memory" or RAM. This memory can be read
or written to, and is used to store all the temporary programs and data.
While the ROMs retain their information even when the power is turned
off, the RAMs lose everything they hold if the power is off. The word
"volatile" is used to describe this capacity; RAM is volatile, ROM is
non-volatile.
Inside an Atari computer, the RAM is theoretically divided further into
two functional parts, although in reality, the memory area is
continuous. One part is the screen memory, which holds all the data
needed to describe what is being seen on the monitor. The rest of RAM
is used for general storage.
Killing Time
The central processing chip (CPU), the 68000, needs to read and write
the memory all the time while operating. The display system also needs
to read the screen memory all the time, to constantly redraw the picture
you are seeing. Since the Atari ST screen memory is really just a part
of the regular memory, the CPU changes the picture by simply rewriting
the RAM portion that is used as screen memory. But, both the CPU and
the screen display circuits are running at the same time. They can't
both read the memory at the same time, so they share!
Inside the standard ST, the RAM is capable of being accessed (read or
written) four million times a second. The processor and the display
system take turns, each accessin memory two million times per second.
One of the differences between an ST and TT is that the TT may have a
lot more RAM than the ST. But, to make the software written for the ST
work on the TT, Atari made the first four Megabytes of RAM in the TT
operate the same as in the ST. In other words, software written for the
TT must keep the screen memory within the first four megabytes, which is
the maximum size memory the ST was designed to use. But this means that
any additional RAM in the TT may follow new rules, and it does!
The first four megabytes are now called standard memory. Anything
beyond that is called fast memory. Because it doesn't need to share its
access times with the screen, fast RAM can be accessed at the full four
million times per second.
When your computer contains the regular 8 MHz 68000 processor, those two
million accesses per second are all it can handle. But, if you have an
Atari with a faster processor, whether because it came with one (the TT
or Mega STe) or you bought a third-party accelerator, that slow memory
rate is slowing you down. If your processor is twice as fast, using TT
fast memory will speed up operations. But if you have an even faster
processor, you're stuck again!
By the way, this bottleneck is not only an Atari phenomenon. All those
PC's out there suffer from this in spades. One answer to the problem is
to move processes that are "normally" done in the bottlenecked RAM to
other, faster memory.
Now, ROM chips (for TOS) that are fast enough to be accessed at a higher
rate are expensive. In the ST and TT, TOS is always accessed at the
slower (original ST) rate, so cheaper chips can be used. But, a copy of
the operating system can be written into very fast RAM, so that the
processor can read there for operating routines, instead of ROM. And
since this memory is as fast as the CPU, there is no slow down. Fast
memory used for this ROM copy purpose is called "shadow RAM".
Fast memory is still too expensive to be used to replace all RAM. But
no program uses the entire RAM at any one time, so it's possible to copy
a portion of regular RAM containing program code and/or data to fast
chips, so that the processor can access them much faster. Fast memory
used in this manner is called "cache RAM".
The complications of cache RAM involve deciding which portions of RAM to
copy, and when, and when to put the data back into RAM. So there is
software (and sometimes special hardware) to manage the very fast RAM.
Of course, shadow and cache RAM only are useful when your CPU is capable
of faster processing than your standard RAM can support.
Another kind of memory we should mention is "virtual" memory. Sometimes
a program requires a great deal of RAM to operate, usually to hold a
large amount of data to be processed. But the program may need to read
only a portion of this at any one time. So, some clever supervisory
software can jump in, grab the data in RAM and write it out to a
temporary file on the hard drive, and then read in the next data to
worked on from the drive and put it in RAM.
Reading and writing to hard drives can be so quick that you don't notice
it. The program you're using doesn't know that it is swapping memory to
disk--it's as though the computer had as much memory in it as your hard
drive has available. Some Atari programs, like Calamus SL and Touch Up,
do this operation by themselves. Virtual memory is also what makes
Windows on the PC's possible.
"Memories are made of this..."
So far, we've described the different uses of memory in Atari computers.
Now let's sort out the alphabet soup of the memory chips themselves:
DRAM, SRAM, VRAM, EPROM, EEPROM, and the latest, Flash RAM.
Above, we spoke of RAM and ROM. These stand for Random Access Memory
and Read Only Memory, which says something about them, but not
everything. Though it might be confusing, a ROM is also "random access
memory!" That only means you may access (read or write) any memory
location on the chip with no regard to the last, previous access you
made.
There are non-random access memories too. In a "shift register," for
example, all the data is stacked up, like in a tube. You can shove data
in at the top, and take it out at the bottom, but to get at something in
the middle, you have to push out everything in front of it. This is
fine if you will be using the data only sequentially, in the order it
was stored.
ROMs
A ROM (sometimes called Masked ROM) is a memory chip whose data is
etched in place during manufacture, and can never be changed. A PROM
(Programmable ROM) comes without anything written to it. The user
"burns" in the data he wants, but then it cannot be rewritten. An EPROM
(Erasable PROM) has a mechanism that can erase all the programmed info
at one time, so that the PROM can be reused. An EEPROM (Electrically
Erasable PROM) can also erase old data, but usually one byte at a time,
so you can selectively rewrite only portions of it.
RAMs
Nearly all of the RAMs most people have ever seen are either DRAM or
SRAM. DRAM (Dynamic RAM) is made from cells of one transistor for each
bit it stores. SRAM (Static RAM) is made of cells that use four to six
transistors for each bit.
The data stored in a dynamic cell will fade and be lost in just a few
thousandths of a second if the computer doesn't read the row of bits
where it resides. The reading causes the electrical charge on the cell
to be refreshed and renewed for another few thousandths. The need to
keep reading every bit of data over and over (whether you're using the
data or not) makes for slower access to the data you really want. But
dynamic RAM chips are denser, able to store more bits on the same size
chip than static RAMs, so they're cheaper.
Static RAMs cost more, but since they don't need to be refreshed, they
can let you work much faster. You don't need to keep addressing all the
rows all the time, making memory fetches both time and power efficient.
Because they can be made so very fast, SRAM is used for cache and shadow
memories. Although it's not done in any Atari computers except the ST
Book, the static RAM's power can be backed up using a battery. This
means you can retain the information even if the computer is off, using
SRAM as a form of non-volatile memory.
Another kind of RAM you sometimes hear mentioned is VRAM or Video RAM.
This is really a regular DRAM combined with a shift register. These
devices are useful for holding the screen data for computers like PC's
that can't keep up with the screen while doing other business, a
function that isn't needed in ST/TT's. What makes them faster for this
work is the VRAM's ability to transfer a whole bunch of words between
the two kinds of memory in one access time, all within the same chip.
Instead of having just sixteen or thirty-two data lines between them to
transfer information, there can be a thousand or more!
Some new RAM devices of which you're likely hear more soon, are Flash
memory and synchronous dynamic cache RAM. Flash RAM is a cross between
ROM and RAM. It uses only one transistor per bit, and a captured
electrical charge tells it whether to be a one or a zero, but it doesn't
have to be recharged every few milliseconds. The write process takes a
lot longer than the read, and the electrical charge must be really
heavy. Flash memory keeps its data when the power is off, like a ROM,
but it's possible and reasonable to rewrite individual bytes, like RAM.
Flash memory won't replace regular RAM because writing takes too long,
but it'll be used in special situations like floppy and hard disk
replacements.
We spoke of cache RAM, usually made of SRAM, with cost keeping us from
using very large cache memories. A new device, the synchronous dynamic
RAM, is a large DRAM combined with a smaller, fast SRAM. Called EDRAM
by some manufacturers, the SRAM part is used as a cache memory, like
normal, and the DRAM part is used for regular RAM memory. But, like the
VRAM, there can be a thousand data lines inside, connecting them, and
lots of data can be exchanged in one access time. This means the cache
memory can work much more efficiently than with two separate chips.
This idea should make cache memory cheaper and more popular in new
computers.
Here's to pleasant memories! -- Norm Weinress
BIO: Norman Weinress is AtariUser's electronic elder statesman. A
veteran of the early days of computing, his current projects include
enhanced graphics systems for the Atari computers.
###### SCSI TAPE BACKUP FOR ATARI ST
###### Captured from the GEnie ST RT
###### ---------------------------------------------------------------
There are two major technologies in today's desktop tape drive market;
QIC (Quarter Inch Cartridge) at the low end and midrange, and DAT
(Digital Audio Tape) at the high end. The dividing line is about 1MB
capacity.
DAT is a new technology. DAT drive capacities are quoted in gigabytes.
Conventional QIC drives have capacities up to 525 megabytes.
Common Tape Drive Interfaces:
QIC-02 --- intelligent hardware tape interface
QIC-36 --- simple hardware tape interface
QIC-104/11 --- SCSI-1 tape interface
QIC-121 --- SCSI-2 tape interface
These standards describe the drive controller. The SCSI standards are
only rarely cited by number; usually, QIC-104 and QIC-121 devices are
referred to simply as "SCSI drives".
Common Recording formats:
QIC-24 --- 9-track 60-Mbyte tape format
QIC-120 --- 15-track 125-Mbyte tape format
QIC-150 --- 18-track 150-Mbyte tape format
QIC-525 --- 26-track 525-Mbyte tape format
Common media:
DC600A --- for QIC-24 and QIC-120 drives
DC6150 --- for QIC-150 drives
DC6525 --- for QIC-525 drives
All 150MB QIC type drives can do 250MB on extended-length tapes, though
some manufacturers discourage you from doing this to avoid excessive
head wear.
The interface used on the Atari ST is SCSI. Beckemeyer Development
offers "SCSI Tape Kit" software that allows one to use a standard SCSI
compatible tape drive with the Atari ST computer; virtually any SCSI
QIC tape drive should work. Most SCSI DAT drives will also work with
the Atari ST "SCSI Tape Kit".
QIC-36 drives may be used by using a separate SCSI controller. Most
QIC-02 drives have a separate QIC-02 to QIC-36 controller board which
may be replaced with a SCSI controller board. Older 60MB QIC drives are
available on the surplus market, typically at a very low cost (often
under $200).
Compatible SCSI controllers for using older QIC-36 drives:
Adaptec ACB-3530
Emulex MT-02
These SCSI to QIC-36 controllers were often used in early Unix
workstations, such as Sun, HP, Apollo, Silicon Graphics etc.
When assembling your own tape subsystem, it is a good idea to use
standard SCSI connectors. This way your tape drive can be use with any
SCSI system, including IBM compatibles, Macintosh, Sun, Next, and
others.
Common SCSI external cable connectors:
Centronix --- IBM-compatible (recommended)
50-pin D --- older Sun equipment, obsolete
SCSI-2 --- Sun Sparc, Next, others
25-pin D --- Macintosh "SCSI"
Centronix cables are the most common and the least expensive. The older
50-pin D-type connectors are not recommended, nor are the Mac style
25-pin D-type connectors. The newer SCSI-2 cables and connectors are
more expensive and more difficult to obtain than Centronix cables.
SCSI Tape Product Listings:
Beckemeyer Development offers pre-wired SCSI drive enclosures, including
all internal cables, SCSI ID selector switch, 50-pin Centronix-type
connectors, Centronix external cable, and power cable. Beckemeyer
Development also offers bare SCSI drives and complete tape subsystems.
Software:
SCSI Tape Kit Plus Hard Disk Toolkit $ 49.95
SCSI Tape Kit (drivers only, no backup SW) $ 20.00
Drive Enclosures:
5.25" half-height $119.00
5.25" full-height $199.00
Bare Drives:
Wangtek 5150ES 150MB (refurbished) $375.00
Wangtek 5150ES 150MB (new) $658.00
Archive Viper 150MB (new) $661.00
Complete Tape Subsystems:
Wangtek 150MB (new case, refurb. drive) $499.00
Wangtek 150MB (new) $864.00
Archive 150MB (new) $950.00
This article downloaded from the GEnie ST Roundtable!
# # #
**--DELPHI SIGN-UP--** **--GENIE SIGN-UP--**
============================|============================
To sign up for DELPHI call | To sign up for GENIE call
(with modem) 800-695-4002. | (with modem) 800-638-8369.
Upon connection hit return | Upon connection type HHH
once or twice. At Password: | and hit return. Wait for
type ZNET and hit <return>. | the U#= prompt and type in
| the following: XTX99436,
| GEnie and hit return.
============================|============================
**--COMPUSERVE SIGN-UP--**
To sign up for CompuServe service call (with phone) (800)
848-8199. Ask for operator #198. You will then be sent a
$15.00 free membership kit.
=========================================================
**--ATARINET INFORMATION--**
If you'd like further information or would like to join
AtariNet-please contact one of the following via AtariNet
or Fido: Bill Scull Fido 1:363/112 AtariNet 51:1/0, Dean
Lodzinski Fido 1:107/633 AtariNet 51:4/0, Terry May Fido
1:209/745 AtariNet 51:2/0, Tony Castorino Fido 1:102/1102
AtariNet 51:3/0, Don Liscombe AtariNet 51:5/0, Daron
Brewood Fido 2:255/402 AtariNet 51:6/0. You can also call
the Z*Net News Service at (908) 968-8148 for more info.
========================================================================
Reprints from the GEnie ST Roundtable are Copyright (c)1992, Atari
Corporation and the GEnie ST RT. Reprints from CompuServe's AtariArts,
AtariPro, AtariVen, or Aportfolio Forums are Copyright (c)1992, CIS.
========================================================================
Reprints from AtariUser Magazine are Copyright(c)1992, Quill Publishing.
You can subscribe and read ALL of the informative articles each and
every month by contacting Quill at (818) 246-6277. For $15.00 you will
receive 12 issues. Send your payment to AtariUser Magazine, 249 North
Brand Boulevard, Suite 332, Glendale, California, USA, 91203. Foreign
delivery is $30.00 in US funds.
========================================================================
Atari is a registered trademark of Atari Corporation. Atari Falcon030,
TOS, MultiTOS, NewDesk and BLiTTER, are trademarks of Atari Corporation.
All other trademarks mentioned in this publication belong to their
respective owners.
========================================================================
**--** Z*NET OFFICIAL INFORMATION **--**
=========================================================
Z*Net Atari Online Magazine is a weekly online publication covering the
Atari and related computer community. Material published in this issue
may be reprinted under the following terms only: articles must remain
unedited and include the issue number and author at the top of each
article reprinted. Reprint permission is granted, unless otherwise
noted at the beginning of the article, to registered Atari user groups
and not for profit publications. Opinions present herein are those
of the individual authors and do not reflect those of the staff. This
publication is not affiliated with the Atari Corporation. Z*Net, Z*Net
News Service, Z*Net International, Rovac, Z*Net Atari Online and Z*Net
Publishing are copyright (c)1992, Syndicate Publishing, PO Box 0059,
Middlesex, NJ 08846-0059, Voice: (908) 968-2024, BBS: (908) 968-8148,
(510) 373-6792.
===~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~==
Z*Net Atari Online Magazine
Copyright (C)1992, Syndicate Publishing - Ron Kovacs
===~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~==
-----------------------------------------
Return to message index
